Details
FIPS 140-2 L2 Validated
Secure SED FIPS 140-2 L2 M.2 SATA SSD drives are self-encrypting drives securing all critical data using strong AES 256-bit encryption. FIPS 140-2 Level 2 hardware encryption ensures that the firmware integrity, encryption technology and physical security of the SSD all meet the requirements set forth by the Federal Information Processing Standard by the National Institute of Standards & Technology (NIST).
CSfC-Listed
All DIGISTOR FIPS SEDs are listed on the NSA CSfC Component List for hardware full drive encryption, which allows DoD, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions.
NIAP-Listed, TAA Compliant, and Common Criteria Validated
DIGISTOR FIPS SEDs are NIAP-compliant (VID #11297), TAA compliant, and have been listed by NIST as FIPS-Certified storage devices with NIST Certificate #3926, ensuring they meet most stringent cybersecurity standards.
- FIPS 140-2 certified: The internal flash build has been Independently certified by one of 13 NIST specified laboratories examining the cryptographic modules. Certified by NIST’s Cryptographic Module Validation Program (CMVP). For more information, refer to the NIST site.
- NIAP-listed Common Criteria (CC) SSD for Full Drive Encryption – Encryption Engine Common Criteria (CC) collaborative Protection Profile (cPP)
- Secure Firmware: Solid secure firmware features secure digital signatures and boot-time attestation which help to protect storage devices against low-level attacks.
- Hardware level AES 256-bit encryption with TCG Opal SSC support: the encryption/decryption is performed on device, independent from the host, reducing CPU load.
- Instant Erase: The ability to complete sanitization of all data on the SSD in under 2 seconds, simplifying device retirement or redeployment.
- Conformal Coating as tamper evidence on board for physical security.
- Our Citadel SEDs make use of the TCG Opal Pre-boot authentication support to authenticate access before the computer boots, which protects the integrity of the OS.
- 3rd party key management options include but not limited to are: Absolute Software, CryptoMill, McAfee, Secude, Softex, Sophos, Symantec, Wave Systems and WinMagic. Linux FDE (Full Disk Encryption) key management methods also supported.
- TAA Compliant
- FIPS 140-2 certified: The internal flash build has been Independently certified by one of 13 NIST specified laboratories examining the cryptographic modules. Certified by NIST’s Cryptographic Module Validation Program (CMVP). For more information, refer to the NIST site.
- NIAP-listed Common Criteria (CC) SSD for Full Drive Encryption – Encryption Engine Common Criteria (CC) collaborative Protection Profile (cPP)
- Secure Firmware: Solid secure firmware features secure digital signatures and boot-time attestation which help to protect storage devices against low-level attacks.
- Hardware level AES 256-bit encryption with TCG Opal SSC support: the encryption/decryption is performed on device, independent from the host, reducing CPU load.
- Instant Erase: The ability to complete sanitization of all data on the SSD in under 2 seconds, simplifying device retirement or redeployment.
- Conformal Coating as tamper evidence on board for physical security.
- Our Citadel SEDs make use of the TCG Opal Pre-boot authentication support to authenticate access before the computer boots, which protects the integrity of the OS.
- 3rd party key management options include but not limited to are: Absolute Software, CryptoMill, McAfee, Secude, Softex, Sophos, Symantec, Wave Systems and WinMagic. Linux FDE (Full Disk Encryption) key management methods also supported.
- TAA Compliant
Technical Specifications
| 2.5-inch SATA Certified SED | |
|---|---|
| Drive Form Factor | SATA 2.5in 7mm |
| Drive Bus | SATA III |
| SATA Bus Speed | up to 6 Gbps |
| Sequential Read | up to 550 MB/s |
| Sequential Write | up to 530 MB/s |
| Random Read | up to 99K IOPS |
| Random Write | up to 91K IOPS |
| MTBF | 1.6 million device hours |
| UBER | < 1 sector per 10^16 bits read |
| End-to-End Datapath Protection | Yes |
| LDPC Error Correction | Yes |
| Active Write (Max.) | 2.1 W |
| Active Read (Max.) | 1.7 W |
| Idle Power Draw | 1.05 W |
| Shock | 1500G |
| Vibration | 20Hz~80Hz/1.52mm | 80Hz~2000Hz/20G |
| Bending | ≥ 50N force |
| Supports S.M.A.R.T. disk info | Yes |
| Encryption | TCG Opal 2.0 hardware level AES 256-bit encryption |
| FIPS Validated | Yes |
| FIPS Description | FIPS 140-2 Level 2 Validated (NIST Certification #3926), CC-Validated (VID 11297) |
| Operating Temperature Range | 0°C to 70°C |
| Non-Operating Temperature Range | -40°C to 85°C |
| Ambient Temperature Range | Operation: 0°C to 70°C; Storage: -40°C to 85°C |
| Dimensions | 3.94" x 2.75" x 0.28" (100mm x 69.85mm x 7mm) |
| Compliance | FCC, UL, CE, RoHS, TAA |
| Warranty | CDSG provides a 3-year limited warranty for this product. |
| Technical Support | Your investment in CDSG products is backed up by our free technical support for the lifetime of the product. If you need to contact us for any reason, visit digistor.com/support. |
Shipping / Returns
We offer a range of standard ground and expedited shipping options from FedEx, UPS, and LTL carriers. Available shipping methods, costs, and transit times will vary based on the weight, value, and destination of your particular shipment. Transit times average 2 – 5 days for shipments within the United States and 3-8 days for international orders.
30-day return period for full refund or exchange. 15% restocking fee may apply.
